SC16V
SC Series 100V Line Indoor Column Speakers
952.241UK
Introduction
Thank you for choosing the Adastra SC series 100V indoor ceiling speakers as part of your sound reinforcement system. Please read and keep this manual for future reference.
Caution: Please read this manual carefully before operating. Damage caused by misuse is not covered by the warranty.
Installation
The SC series column speakers are supplied with a top and bottom bracket for mounting to a wall or upright support. The top bracket can be extended to allow a downward angle if mounting at height. Lateral adjustment is afforded by pivoting the speaker on the brackets.
The rear of each SC series column speaker is fitted with a speaker wire. Connect this wire to the output of a 100V amplifier by linking the white core to “100V” (or +) and the black core to “COM” (or -). If extending this cable, be sure to use 2-core double-insulated cable which is the same power handling as the speaker wire or higher.
The rear of the column speaker also has a rotary
volume adjustment, which can be set to a number of “Wattage” settings.
These will set the maximum power for the column speaker at 100V.
Alternatively, the speaker may be switched to a low impedance setting
for use with a standard (non-100V) amplifier. For SC16V, the impedance
is 8Ω and for SC32V it is 4Ω. Check the amplifier manual for correct
impedance and do not exceed the RMS power rating of the column speaker.
Specification
| Specification | Value |
|---|---|
| Weight | 2.3kg |
| Dimensions | 105 x 410 x 90mm |
| SPL @ 1W/1m | 91dB |
| Tappings | 12W, 6W, 3W, 1.5W & 8 Ohms |
| Impedance : 100V | 833, 1.6k, 3.3k,6.6k ohms |
| Impedance (nominal) | 8 Ohms |
| Power handling : max. | 32W |
| Power handling : rms | 16W |
| Drivers | 4 x 63mmØ (2.5") |
| Finish | White |
| Frequency response : -10dB | 200Hz - 16kHz |
| Dispersion angle | 160° (transverse plane) |
| Cable : length | 900mm |
Precautions
 |
CAUTION |  |
| RISK OF ELECTRIC SHOCK DO NOT OPEN | ||
| CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL | ||
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit
Safety Notice
- Prior to use, read through this safety guide.
- Pay attention to safety warnings.
- Observe all operating requirements.
- For any items designed for indoor use only, do not operate near water or in humid environments.
- For cleaning, only use a lint-free, dry cloth.
- Install according to the specifications.
- Place away from heat sources or heating appliances.
- During placement, ensure adequate support for the product and access to controls and connectors.
- Do not obstruct any cooling vents or openings and allow adequate space for air flow.
- Use only power connections supplied with the product or suitable equivalents.
- Do not modify the equipment in any way.
- For any mains powered appliances, ensure that the mains voltage is as described in the specifications.
- Keep powered products and batteries away from the reach of children.
- In case of malfunction, water ingress or other damage, consult qualified service personnel.
- Avoid pressure or impact to the housing that may result in damage when transporting or installing this product.
- For any Earthed mains product, ensure that the power supply has a protective Earth connection.
- Keep all packaging materials out of reach of children.
Disposal : The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland
