DB300

Plug Through Wireless Door Chime

350.300UK

Introduction

An easy to install, mains powered doorbell with integral 13A socket and remote push button, providing up to 80m wireless range. The waterproof push button simply installs against a door frame using the self-adhesive pad provided. House numbers and names can be displayed on the removable name card, protected beneath a clear plastic cover. A choice of 38 melodies, alerts users to visitors via a simple, plug through chime that can be moved as required within a 80m operating range of the push button. Auto-match code function to prevent outside interference from other wireless devices in the immediate area of the mains unit. Ideal for use in larger homes and business premises or as an assistance button for the elderly.

Features

Simple wire-free installation
Choice of 38 ring tones and melodies
Digital coded signal to prevent outside interference
Wireless range of up to 80m
Waterproof remote push button with name card
Mains plug through unit is for indoor use only
Can also be used as an assistance button for the elderly
Battery for door press supplied (12V 23A)

Transmitter Installation

Remove the front cover of the door press and insert the 12V battery supplied, observing the polarity indicators within the battery compartment. Try not to touch or disturb any of the other components inside the unit.
Mount the unit on the doorframe or window frame using the adhesive pad provided. Please ensure the mounting surface is clean and free from grease before installation.

Receiver Installation

Plug the receiver unit into a UK mains socket within the 80m range of the door press transmitter and switch on. Try to ensure there is a clear line of sight between the units if possible and that there are no radio receivers or wireless devices in the direct location of the unit to avoid interference.
Press the button on the transmitter to test that both units are connected properly and that there are no issues with signal or interference.
Press the button on the side of the receiver unit repeatedly to select one of the 38 ringtones available.
If the receiver fails to sound when the transmitter is depressed at any time, please replace the 12V battery.

Warning:

For reasons of electrical safety, this device must never be immersed in water, exposed to damp conditions or excessive force.
Do not use this device if you find that it is damaged in any way.
Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your warranty.

Specification

Specification	Value
Power supply : receiver	230Vac, 50Hz
Battery : transmitter	12V (23A)
Frequency	433.92 MHz (±150kHz)
Range	80m (Open air)
Dimensions : receiver	116 x 47 x 68mm
Dimensions : transmitter	88 x 20 x 36.5mm
Weight : receiver	129g
Weight : transmitter	25g

Precautions

	CAUTION
	RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit

Safety Notice

Prior to use, read through this safety guide.
Pay attention to safety warnings.
Observe all operating requirements.
For any items designed for indoor use only, do not operate near water or in humid environments.
For cleaning, only use a lint-free, dry cloth.
Install according to the specifications.
Place away from heat sources or heating appliances.
During placement, ensure adequate support for the product and access to controls and connectors.
Do not obstruct any cooling vents or openings and allow adequate space for air flow.
Use only power connections supplied with the product or suitable equivalents.
Do not modify the equipment in any way.
For any mains powered appliances, ensure that the mains voltage is as described in the specifications.
Keep powered products and batteries away from the reach of children.
In case of malfunction, water ingress or other damage, consult qualified service personnel.
Avoid pressure or impact to the housing that may result in damage when transporting or installing this product.
For any Earthed mains product, ensure that the power supply has a protective Earth connection.
Keep all packaging materials out of reach of children.

Disposal : The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.