RC5

Wireless Remote Control Mains Sockets - Set of 5

350.115UK

Introduction

Leaving an appliance in standby can still consume up to 70% of full power and can shorten the life of the appliance by 15%. These adaptors can be controlled individually by the remote supplied. Ideal for a wide variety of electrical appliances and a great solution for controlling appliances in inaccessible places, or for people with limited mobility.

Features

Reduces fire risk and protects your appliances
Remote control operates up to 30m away from socket
Sockets are pre-programmed with remote control supplied for instant use
Additional sockets and remotes can be added using self-learning function
Reduces your household energy costs and carbon footprint

Operation

All socket receivers have been pre-paired to the supplied remote and can be used immediately. To re-pair the remote control with any receiver socket, please follow the instructions below:

1) Plug the socket in and turn on by pressing the yellow button on the side of the unit.

2) Press and hold the yellow button again until the socket turns off.

3) Press the desired “ON” key on the remote.

4) The socket should now be synchronised with the desired “ON” and “OFF” key on the remote.

It is also possible to pair multiple sockets to the same remote or to pair up to 3 remotes to a single socket by using the same procedure above.

Unpairing a socket from the remote is also possible by unplugging the socket from the mains. Press and hold the yellow button on the side of the socket while plugging the socket back in, keep the button pressed for 5 seconds and the socket should be un-paired from all remotes.

If sockets are not responding correctly or the LED indicator on the remote control becomes dim, then the battery should be changed at the earliest possible opportunity. Install the 12V (23A) battery in the battery compartment; making sure the polarity is the correct way around. Always dispose of old batteries with consideration for the environment.

Warning:

For reasons of electrical safety, this socket must never be immersed in water, exposed to damp conditions or excessive force.
Do not use this product if you find that it is damaged in any way.
Never exceed the maximum load current.
Do not attempt to repair this product or take it apart under any circumstances, as this will invalidate your warranty.

Specification

Specification	Value
Quantity in set	5 sockets, 1 remote
Voltage	240Vac, 50Hz
Max. load	2400W per socket
Max. current	10A per socket
Standby power	0.6W
Transmission frequency	433.92MHz - AM
Remote battery	12V, 23A
Remote : range	Up to 30m (clear line of sight)
Socket : dimensions	99 x 55 x 70mm
Remote dimensions	104 x 36 x 16mm
Weight	650g

Precautions

	CAUTION
	RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit

Safety Notice

Prior to use, read through this safety guide.
Pay attention to safety warnings.
Observe all operating requirements.
For any items designed for indoor use only, do not operate near water or in humid environments.
For cleaning, only use a lint-free, dry cloth.
Install according to the specifications.
Place away from heat sources or heating appliances.
During placement, ensure adequate support for the product and access to controls and connectors.
Do not obstruct any cooling vents or openings and allow adequate space for air flow.
Use only power connections supplied with the product or suitable equivalents.
Do not modify the equipment in any way.
For any mains powered appliances, ensure that the mains voltage is as described in the specifications.
Keep powered products and batteries away from the reach of children.
In case of malfunction, water ingress or other damage, consult qualified service personnel.
Avoid pressure or impact to the housing that may result in damage when transporting or installing this product.
For any Earthed mains product, ensure that the power supply has a protective Earth connection.
Keep all packaging materials out of reach of children.

Indoor use only : The "House" symbol identifes electrical equipment designed primarily for indoor use.

Disposal : The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.