2WID001

2.4Ghz Wireless Digital Intercom

350.005UK

Introduction

A stylish and attractive wireless digital intercom that allows you to talk to your visitors before opening the door. No wires are required between the outdoor and indoor units making this system very simple to install. Both units are powered by a rechargeable battery with the indoor unit doubling as a battery charger when connected to a suitable USB power source using the charging lead provided. Its also possible to connect the outdoor unit to an electronic door lock, utilising the door release button on the indoor unit. Ideal for use in domestic and business applications and helpful for the elderly or less mobile.

Features

Simple wire free installation and setup
Up to 500m transmission range
8 Ringtones and adjustable ring volume
Recharge the batteries using the indoor unit and USB charging lead (supplied)
Weatherproof outdoor unit can be connected to an electronic lock (not supplied) when connected to mains power
Outdoor unit can also be mains powered using additional 12V PSU 350.006UK (not supplied)
LED indicators for low battery warning and battery charging status

In The Box

Outdoor unit (IP44)
Indoor unit
Rain shade for outdoor unit
2pcs DC3.7V Rechargeable battery
USB charging lead (1m)
Electronic lock connecting wire
Fixing kit
User guide

Installation

Outdoor unit

Fasten the rain shade on the wall around 1.4~1.7m above the ground using the screws and plugs provided in the fixing kit.
Open the battery cover using a small Philips screwdriver and insert one of the DC3.7V rechargeable batteries ensuring the correct polarity.
Replace the cover and screw then slot the unit into the rain shade.
Secure the unit from underneath using the fixing screw provided in the fixing kit.
Its also possible to power the outdoor unit using an additional DC12V mains power supply (350.006UK not supplied). If mains installation is required, please use a qualified electrician and ensure the rechargeable battery is removed before installation.

Indoor unit

The indoor unit can simply be stood on a suitable flat surface or hung on a wall using the fixing screws provided and keyhole slots in the back of the unit.
Please ensure the unit is kept in a dry environment away from direct sunlight and any wireless items that may interfere with the signal such as cordless phones, indoor aerials or WiFi hubs and routers.
Open the battery cover using a small Philips screwdriver and insert one of the DC3.7V rechargeable batteries ensuring the correct polarity.
Replace the cover and screw to secure the unit.
There is also a USB charging port on the top of the indoor unit which can be used to charge up the batteries used in both units.
Simply insert the USB charging cable provided into the charging port and connect the cable to a suitable USB power source.
During charging the unlock button will flash, then go out once the battery is fully charged.

Electronic Door Lock

Its possible to connect the outdoor unit to an additional electronic door lock (not supplied) using the connecting wire provided.
This is only possible if the outdoor unit is connected to mains power using the additional 12V power supply mentioned above.
It is recommended to use RVV2 x 1.0mm² cable to connect to the electronic door lock.
Once the door lock is connected correctly the unlock button will also be activated on the indoor unit.

NOTE: it is recommended that all wiring connections for both the electronic door lock and 12V DC power supply are undertaken by a qualified electrician.

Operation

When the call button is pressed on the outdoor unit, the indoor unit chime will sound and the LED on the talk button will illuminate.
Press the talk button to acknowledge and talk with your visitor and press again to end the conversation.
If an electronic door lock is connected you can also press the unlock button to admit your visitor entry to your property.
It is possible to select a different chime on the indoor unit. Simply scroll through the 8 available melodies by pressing the chime selection button repeatedly.
To adjust the chime volume, press the volume adjustment button repeatedly to select either high, medium or low volume setting accordingly.

System Alerts

The LED on the outdoor unit call button flashing slowly indicates the battery level is low and it should be recharged as soon as possible.
The LED on the indoor unit unlock button flashing slowly indicates the battery level is low and it should be recharged as soon as possible.

Warning:

For reasons of electrical safety, this device must never be immersed in water, exposed to damp conditions or excessive force.
Do not use this device if you find that it is damaged in any way.
Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your warranty.

Specification

Specification	Value
Frequency	426~440 MHz
Transmission distance	Up to 500m (open area)
IP rating	IP44 (outdoor unit only)
Power supply : indoor unit	18650 Lithium rechargeable battery (DC3.7V)
Power supply : outdoor unit	18650 Lithium rechargeable battery (DC3.7V) or DC12V 1~2A Mains adaptor (not supplied)
Dimensions (indoor unit)	154 x 54 x 36mm
Dimensions (outdoor unit)	158 x 62 x 50.5mm
Weight (indoor unit)	165g (including battery)
Weight (outdoor unit)	220g (including cover & battery)

Precautions

	CAUTION
	RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit

Safety Notice

Prior to use, read through this safety guide.
Pay attention to safety warnings.
Observe all operating requirements.
For any items designed for indoor use only, do not operate near water or in humid environments.
For cleaning, only use a lint-free, dry cloth.
Install according to the specifications.
Place away from heat sources or heating appliances.
During placement, ensure adequate support for the product and access to controls and connectors.
Do not obstruct any cooling vents or openings and allow adequate space for air flow.
Use only power connections supplied with the product or suitable equivalents.
Do not modify the equipment in any way.
For any mains powered appliances, ensure that the mains voltage is as described in the specifications.
Keep powered products and batteries away from the reach of children.
In case of malfunction, water ingress or other damage, consult qualified service personnel.
Avoid pressure or impact to the housing that may result in damage when transporting or installing this product.
For any Earthed mains product, ensure that the power supply has a protective Earth connection.
Keep all packaging materials out of reach of children.

Disposal : The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.