20LED-SSL

20 LED Solar Outdoor Garden Wall Fence Light with Motion Sensor

154.842UK

Introduction

A compact, solar powered LED light that is simple to install and requires no wiring or mains power. The intelligent motion sensor triggers a bright LED light in the hours of darkness when motion is detected, providing a reliable and energy efficient solution for outdoor illumination and security lighting.

(media/image1.jpeg)

Features

Solar powered
Compact robust design
Ideal for homes, gardens and driveways
Suitable for outdoor use; IP44 rated (Weatherproof)
Easy to install, uses 1 fixing screw (supplied)
Front switch controls manual on/off and 3 motion sensor modes

Getting Started

Unpack the light and remove all packaging materials.
Fix to the wall in a suitable position making sure it provides your property with the maximum coverage angle and is away from any obstructions that could block the sensor path. Ideally set it facing South to get the maximum coverage from the sun.
Once in position the light will take on charge through the daylight hours and can provide up to 12 hours of continuous lighting from a single day’s charge.
The front button next to the motion sensor, controls the light’s different modes. Press repeatedly to switch between manual on/off and the 3 motion sensor modes as below:

Mode 1: Operates at 100% brightness when triggered by movement.

Mode 2: Operates at 50% brightness until triggered by movement.
Mode 3: Constant light in the hours of darkness.

Please note turning the light on and off at any time will not affect the solar charging operation.

In The Box

Solar LED light
Fixing screws
User manual

Safety Disclaimer

Check the unit for any signs of damage before using for the first time.
Do not attempt to replace the LED bulbs or service this product yourself as opening or removing covers may result in fire, electric shock or equipment damage and invalidate the warranty.
Do not expose this product to extreme temperatures or a naked flame.
Do not look directly into the LED panel or shine in the eyes of others in case of personal injury.
The LED panel can get hot if on for an extended period, so please do not touch.
Keep out of the reach of children.

Specification

Specification	Value
Weight	143g
Dimensions	122 x 95 x 48mm
IP rating	IP44
Power supply	Solar panel 4.5V 3W
Luminous flux	100% light: 150 lumens, 50% light: 75 lumens
Operating time	100% light: 5 hours, 50% light: 10 hours
Colour temperature	6500K
Average lifetime	50,000 hours
Charge time	Approx. 8 hours
LED : type	SMD 2835
LED : quantity	20LED's
Sensor distance	3.5 - 5m
Sensor angle	120°
Installation	Up to 2m height
Battery	1200mAh
Material	ABS

Precautions

	CAUTION
	RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit

Safety Notice

Prior to use, read through this safety guide.
Pay attention to safety warnings.
Observe all operating requirements.
For any items designed for indoor use only, do not operate near water or in humid environments.
For cleaning, only use a lint-free, dry cloth.
Install according to the specifications.
Place away from heat sources or heating appliances.
During placement, ensure adequate support for the product and access to controls and connectors.
Do not obstruct any cooling vents or openings and allow adequate space for air flow.
Use only power connections supplied with the product or suitable equivalents.
Do not modify the equipment in any way.
For any mains powered appliances, ensure that the mains voltage is as described in the specifications.
Keep powered products and batteries away from the reach of children.
In case of malfunction, water ingress or other damage, consult qualified service personnel.
Avoid pressure or impact to the housing that may result in damage when transporting or installing this product.
For any Earthed mains product, ensure that the power supply has a protective Earth connection.
Keep all packaging materials out of reach of children.

Disposal : The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.