Resonate

Resonate: Metallic Bluetooth On-Ear Headphones

100.582UK

Introduction

Dynamic bass, cutting-edge metallic design and an array of features combine in these stylish wireless Bluetooth headphones. Earcup controls provide intuitive command over track selection, volume and hands-free operation and soft, over-ear cushions and a padded headband make for long-lasting comfort, whether you’re relaxing or ‘on the move’. The in-built rechargeable Lithium-ion battery provides up to 10 hours use from a single charge and the included soft carry pouch keeps them safe and sound when not being used.

Features

Cutting edge, metallic design offering style and comfort
Dynamic bass with crisp, clear highs
Rechargeable with up to 10 hours playback
Earcup controls for track selection, volume and hands-free
Bluetooth 5.0 connectivity up to 10m range
Built in mic for hands-free phone calls
Storage pouch and 3.5mm audio lead supplied
Fully compatible with iOS and Android devices

Controls and Functions

Volume up/Next track button.
MF button - On/Off/Play/Pause/Call answer/Call reject.
Volume down/Previous track button.
USB charging port.
LED indicator.

Charging your headphones

Even though your headphones will come with some battery charge, it is advisable to fully charge them before first use. Connect them to a suitable USB power source using the USB lead provided and leave charging for around 2.5 hours or until the LED indicator (5) goes blue. After fully charging you will get around 10 hours playtime before you need to recharge the headphones, always try to avoid letting them go totally flat to deter internal battery damage.

Bluetooth mode

Press and hold the MF - Multi-function button (2) to turn on the headphones and enter Bluetooth pairing mode, this is indicated by the LED indicator (5) alternating red and blue. Open your device’s Bluetooth section and search for the pairing name “AV:Link-Resonate” and select. If your device asks you for a pairing code enter “0000”. Once successfully paired a tone can be heard and the LED indicator (5) on the headphones will flash blue intermittently. Use the earcup control buttons (1, 2 & 3) to play, pause or navigate up and down your playlist. Short press MF button (2) to play and pause the current track, short press button (1) to increase the master volume or button (3) to decrease it. Long press button (1) to skip to the next track on your playlist or button (3) for the previous track.

Powering on and off

To turn on the headphones simply press and hold the MF button (2) until LED indicator glows blue, they will then automatically pair with your smart device if in range and it has Bluetooth switched on. If no device is in range, they will then enter pairing mode as described above. To turn the headphones off at any time, simply press and hold the MF button (2) again until the LED indicator glows red and then goes out.

AUX (3.5mm) mode

Use the 3.5mm AUX cable provided to connect your headphones to any compatible audio source. The headphones don’t need to be switched on, but the track control and volume buttons wont work and must be controlled by your source device.

Hands-free calls

These headphones are also capable of handling hands-free calls from your mobile device whilst connected via Bluetooth. To accept and complete an incoming call press the MF button (2) once, to reject it press twice. To redial the last number stored in the phone’s memory (incoming or outgoing) press the MF button (2) twice while you are not on a call.

In the box

Wireless Headphones
Drawstring Carry bag
3.5mm audio lead (1m)
USB charging lead (50cm)
User guide

Troubleshooting

The Bluetooth headphones will not pair with my device.

Check that the headphones are in pairing mode; Bluetooth is enabled on your device; and the device is set as ‘discoverable’.

The Bluetooth headphones disconnect with my device within the stated 10m transmission distance.

The maximum transmission distance stated is dependent on a clear line of sight between the headphones and your device. If there are large metallic objects or other devices transmitting radio or wireless signals in the vicinity, they may impact on the reception of the headphones.

The Bluetooth headphones won’t reconnect with my device.

On occasion, your Bluetooth device or the headphones may enter a locked state and need resetting. To do this, Turn the headphones off, find them in your device list and select “forget this device”. Then, follow the pairing instructions described in Bluetooth mode above.

Specification

Specification	Value
Power : battery	Internal rechargeable 400mAh Lithium-ion
Battery life	Up to 10 hours (playback and talk time)
Standby time	Up to 200 hours
Charge time	2.5 hours (approx.)
Speaker : driver	40mmØ
Frequency response	20Hz-20khz
Sensitivity	110±3db
Impedance	32 Ohms
Bluetooth version	5.0
Bluetooth range	Up to 10m (clear line of sight)
Connections	Bluetooth, 3.5mm stereo jack, micro USB (charging)
Dimensions	220 x 170 x 45mm
Weight	210g

Precautions

	CAUTION
	RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit

Safety Notice

Prior to use, read through this safety guide.
Pay attention to safety warnings.
Observe all operating requirements.
For any items designed for indoor use only, do not operate near water or in humid environments.
For cleaning, only use a lint-free, dry cloth.
Install according to the specifications.
Place away from heat sources or heating appliances.
During placement, ensure adequate support for the product and access to controls and connectors.
Do not obstruct any cooling vents or openings and allow adequate space for air flow.
Use only power connections supplied with the product or suitable equivalents.
Do not modify the equipment in any way.
For any mains powered appliances, ensure that the mains voltage is as described in the specifications.
Keep powered products and batteries away from the reach of children.
In case of malfunction, water ingress or other damage, consult qualified service personnel.
Avoid pressure or impact to the housing that may result in damage when transporting or installing this product.
For any Earthed mains product, ensure that the power supply has a protective Earth connection.
Keep all packaging materials out of reach of children.

Disposal : The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of according to your local council guidelines.